Ocean-bottom seismograph tomographic experiments—a consideration of acquisition geometries vs. resources     

Christine Peirce  Anthony J. Day 《Geophysical Journal International》2002,151(2):543-565

  相似文献   

考虑几何非线性的强夯流固动力耦合分析     

谢能刚  宋修广  王璐 《水文地质工程地质》2003,30(5):44-48

针对强夯法加固地基机理的流固动力耦合分析问题,本文考虑土体的几何非线性,建立土体非线性动力平衡方程和整体流固动力耦合方程,给出土体非线性动力平衡方程的迭代计算格式和流固动力耦合方程的解耦计算方法,并对一具体算例进行了数值分析,得到了地基位移、应力等在强夯作用下的变化规律和在空间上的分布特征,为精确模拟分析强夯加固机理提供了有效途径。  相似文献   

The role of sediment specific gravity and availability on cluster evolution     

A. N. Papanicolaou  K. Strom  A. Schuyler  N. Talebbeydokhti 《地球表面变化过程与地形》2003,28(1):69-86

The objective of this experimental study was to account for the role of sediment availability and specific gravity on cluster formation and cluster geometric characteristics (spacing and size). To isolate the effects of sediment availability and specific gravity on cluster evolution, mono‐sized spheres were used to simulate the cluster evolutionary cycle. Overall, twelve experimental runs were carried out in the laboratory flume. Six of these tests were performed by using glass spheres (specific gravity, SG = 2·58) and the other six by employing an equal combination of glass and Teflon spheres (SG = 2·12) of the same diameter to evaluate the role of specific gravity on cluster evolution. The three sediment availability conditions that were investigated here simulated isolated gravel elements, pool–riffle sequences and densely packed gravel‐bed. An advanced image analysis technique was employed to track the evolution of cluster microforms and provide quantitative information about the size and shape of clusters and the number of clusters per unit area. The results of this study showed that: (1) sediment availability affects the architecture and size of cluster microforms; and (2) clusters consisting of mono‐sized sediments start disintegrating at twice the incipient conditions. By performing complementary tests for the isolated gravel elements case, it was found that the evolutionary cycle of individual clusters could be described as follows, in order of increasing stress: no cluster→two particle cluster→comet→triangle→rhomboid→break up. Copyright © 2003 John Wiley & Sons, Ltd.  相似文献   

Can flat-ramp-flat fault geometry be inferred from fold shape?: A comparison of kinematic and mechanical folds     

Heather M. Savage  Michele L. Cooke 《Journal of Structural Geology》2003,25(12):2023-2034

The inference of fault geometry from suprajacent fold shape relies on consistent and verified forward models of fault-cored folds, e.g. suites of models with differing fault boundary conditions demonstrate the range of possible folding. Results of kinematic (fault-parallel flow) and mechanical (boundary element method) models are compared to ascertain differences in the way the two methods simulate flexure associated with slip along flat-ramp-flat geometry. These differences are assessed by systematically altering fault parameters in each model and observing subsequent changes in the suprajacent fold shapes. Differences between the kinematic and mechanical fault-fold relationships highlight the differences between the methods. Additionally, a laboratory fold is simulated to determine which method might best predict fault parameters from fold shape. Although kinematic folds do not fully capture the three-dimensional nature of geologic folds, mechanical models have non-unique fold-fault relationships. Predicting fault geometry from fold shape is best accomplished by a combination of the two methods.  相似文献   

Curvature analysis of triangulated surfaces in structural geology   总被引：6，自引：0，他引：6  

Philippe Samson  Jean-Laurent Mallet 《Mathematical Geology》1997,29(3):391-412

This paper addresses the problem of characterizing the shape of a geological surface on the basis of its principal curvatures. The surface is assumed to be modeled as a set of adjacent triangles defined by the location of their vertices and a method is proposed for estimating numerically the principal curvatures at the vertices of the triangles using a local C² interpolant. Also shown is how principal curvatures can be useful for studying the deformation of a geological surface (with application to 3D balanced unfolding), and analyzing the folding or faulting of the interface between two adjacent layers.  相似文献   

Pall型摩擦阻尼支撑内力计算方法   总被引：3，自引：0，他引：3  

吴斌  张纪刚  欧进萍 《世界地震工程》2004,20(2):6-11

从Pall摩擦阻尼器四连杆机构的几何非线性变形特征出发，分析框架位移、支撑刚度、阻尼器摩擦力、阻尼器大小、支撑倾角、支撑屈曲力等对一种改进的Pall摩擦阻尼器-T形芯板摩擦阻尼器支撑的受力特点，拟合出可供设计人员使用的实用计算公式。  相似文献   

Comparison of hydraulic geometry between sand‐ and gravel‐bed rivers in relation to channel pattern discrimination     

Jiongxin Xu 《地球表面变化过程与地形》2004,29(5):645-657

A comparison has been made between the hydraulic geometry of sand‐ and gravel‐bed rivers, based on data from alluvial rivers around the world. The results indicate a signi?cant difference in hydraulic geometry among sand‐ and gravel‐bed rivers with different channel patterns. On this basis, some diagrams for discrimination of meandering and braided channel patterns have been established. The relationships between channel width and water discharge, between channel depth and water discharge, between width–depth ratio and water discharge and between channel slope and water discharge can all be used for channel pattern discrimination. The relationship between channel width and channel depth can also be used for channel pattern discrimination. However, the accuracy of these relationships for channel pattern discrimination varies, and the depth–discharge relationship is a better discriminator of pattern type than the classic slope–discharge function. The cause for this difference has been explained qualitatively. To predict the development of channel patterns under different natural conditions, the pattern discriminator should be searched on the basis of independent or at least semi‐independent variables. The relationship between stream power and bed material grain size can be used to discriminate channel patterns, which shows a better result than the discriminator using the slope–discharge relationship. Copyright © 2004 John Wiley & Sons, Ltd.  相似文献   

安徽张八岭地区西冷岩组早期构造变形特征   总被引：3，自引：0，他引：3       下载免费PDF全文

鲁如魁高天山  张志树刘家云 吴海权 《中国地质》2004,31(2):131-138

安徽张八岭地区西冷岩组早期构造变形复杂，主要表现为褶皱以及与褶皱变形密切相关的韧性剪切变形。野外调查表明，该地层中至少发育3期褶皱变形，其中F1为北西向韧性剪切褶皱；F2为向南南西倾伏的纵弯褶皱；F3为近东西向的宽缓褶皱。F1与F：联合制约了西冷岩组岩层展布的总体格局。显微构造，特别是岩石的磁性组构特征证明了区内曾发生过多期构造变形，且有两期最为显著，即早期的水平剪切和随后发生的侧向挤压。本文重点阐述上述褶皱变形的几何学特征，并进行运动学和动力学分析。  相似文献   

基于共反射点叠加的观测参数选择   总被引：1，自引：2，他引：1  

朱海波  黄德济  贺振华 《物探化探计算技术》2004,26(2):121-124

在地震勘探数据处理中，通常采用的共中心点(CMP)叠加技术对于复杂的地质构造难以取得好的效果。若通过从道间距、覆盖次数等观测参数与目标层地层倾角、共反射点离散度的关系出发，并结合模型正演，对复杂构造地层的观测参数选取进行优化，使之能对目标层尤其是逆断层下降盘的阴影层段进行较充分的“照明”，即可得到共反射点叠加剖面，这对共反射点叠加是一项有益的研究。  相似文献   

Channel adjustments of the lower Trinity River,Texas, downstream of Livingston Dam     

Jonathan D. Phillips  Michael C. Slattery  Zachary A. Musselman 《地球表面变化过程与地形》2005,30(11):1419-1439

Channel cross‐sectional changes since construction of Livingston Dam and Lake Livingston in 1968 were studied in the lower Trinity River, Texas, to test theoretical models of channel adjustment, and to determine controls on the spatial extent of channel response. High and average flows were not significantly modified by the dam, but sediment transport is greatly reduced. The study is treated as an opportunistic experiment to examine the effects of a reduction in sediment supply when discharge regime is unchanged. Channel scour is evident for about 60 km downstream, and the general phenomena of incision, widening, coarsening of channel sediment and a decrease in channel slope are successfully predicted, in a qualitative sense, by standard models of channel response. However, there is no consistent channel response within this reach, as various qualitatively different combinations of increases, decreases or no change in width, depth, slope and roughness occur. These multiple modes of adjustment are predicted by the unstable hydraulic geometry model. Between about 60 km and the Trinity delta 175 km downstream of the dam, no morphological response to the dam is observed. Rather than a diminution of the dam's effects on fluvial processes, this is due to a fundamental change in controls of the fluvial system. The downstream end of the scour zone corresponds to the upstream extent of channel response to Holocene sea level rise. Beyond 60 km downstream, the Trinity River is characterized by extensive sediment storage and reduced conveyance capacity, so that even after dam construction sediment supply still exceeds transport capacity. The channel bed of much of this reach is near or below sea level, so that sea level rise and backwater effects from the estuary are more important controls on the fluvial system than upstream inputs. Copyright © 2005 John Wiley & Sons, Ltd.  相似文献